How to use iLogic export

One download from Auto-groove package: a zip with four files. The iLogic rule cuts the O-ring groove in Inventor 2021+, on a piston OD or in a housing bore, depending on the mode you calculated.

What you get

After the demo €5 pay step (no real charge) the auto-groove button downloads one zip. All file names start with designcalculations-oring-<standard>-<size>-<mode>:

  • _autogroove.iLogicVb (piston) or _boregroove.iLogicVb (bore) — the iLogic rule. It writes the GD_* parameters, asks you to pick the cylindrical face, a datum edge and a distance, and revolve-cuts the groove with depth F, width G and bottom radius R.
  • .step — the chosen O-ring as a torus (inside diameter and cross-section), generic, no supplier part number.
  • .csv — the same values, one per row, with the unit in the field name (_mm, _in, _pct).
  • .pdf — one-page dimension sheet with a section sketch.

On the calculator

  1. Calculate a piston or bore groove on the O-ring calculator. The package follows the mode.
  2. Click Auto-groove package (€5). The button is disabled while the result has an error.
  3. Confirm with Paid (test) — demo unlock only; nothing is charged.
  4. Unzip the download.

See it in action

Demo (67 s, no sound, Dutch prompts): creating a groove on a piston, adding a second groove, then editing it from 45 to 22 mm.

Running the rule in Inventor

  1. Open a part (.ipt): with a round outside for a piston groove, with a round bore for a bore groove. Assemblies and drawings are rejected.
  2. Manage → iLogic → Add Rule → paste the .iLogicVb text → Save → Run.
  3. If a DC groove already exists, choose Create new groove or Update existing DC groove (update = delete and recreate). The bore rule says “bore groove”.
  4. Pick the cylindrical face: the outside face for a piston, the bore face for a bore groove.
  5. Pick a datum edge (for example the end of the piston).
  6. Enter the distance in mm from that edge to the nearest groove wall (not the groove centre). The groove centre is at distance + G/2. A decimal comma or point both work.
  7. Two questions follow:
    • Tolerance on a model parameter — only asked when a model parameter has the same value as the picked diameter. Yes sets the ± tolerance on that parameter (its value is not changed); No (default) leaves it alone. GD_HardwareDiam_mm always gets the tolerance.
    • Lead-in chamfer 1 mm × 15° on the picked datum edge — Yes (default) adds it, No skips it.
  8. Features appear as DC_ORingGroove… (bore: DC_ORingBoreGroove…) with sketch and work-plane helpers.
  9. Transfer sizes and tolerances to the drawing (.idw) yourself; the rule adds no drawing dimensions.

Dimensions used

  • F = groove depth measured from the picked cylinder face (F = L − E/2, where L is the gland depth from Parker Design Chart 4-2 / 5-2 and E the diametral clearance).
  • G = groove width (middle of the Parker range; G1/G2 when backup rings are advised for AS568).
  • R = groove bottom radius (middle of the Parker range).
  • 3D geometry uses these nominal values; the ± values are stored in the GD_* parameters.
  • Baseline API: Inventor 2021. Newer versions should work; older versions are not tested.
  • The rule does not create a norm certificate or drawing dimensions.
Price: €5 per package. The current checkout is a demo unlock per browser tab.