Design Calculations · Hollow section

Hollow section deflection calculator

Pick a section and a span → get deflection, L/x and bending stress

Sizes H × B × t in mm. H is the height, B the width.
Load on
mm
N
0 = no point load.
Fill in the inputs to see the beam
—

Result

Fill in the inputs: the deflection appears here.
Print and CSV are free.
Details: section, loads, formulas and sources

Design aid only. Check the calculation and the loads yourself before production. No safety factor and no stability check (buckling, lateral-torsional buckling, local buckling) is included, and the supports are assumed to be free to rotate.

Worked examples

Two examples you can check by hand. The button puts the same input into the calculator.

Example 1: steel section 100 × 100 × 5, point load

Input: steel (E = 210,000 N/mm²), span L = 2000 mm, point load F = 5000 N at mid-span, no self weight.

Section with corner radii ro = 2t = 10 mm and ri = 5 mm: A = 2·5·(100 + 100 − 2·5) − (4 − π)(10² − 5²) = 1835.6 mm². Second moment of area I = 2,711,000 mm⁴ (table: 271 cm⁴).

Deflection f = F·L³ / (48·E·I) = 5000 · 2000³ / (48 · 210,000 · 2,711,000) = 1.46 mm, i.e. L/1366.

Moment M = F·L / 4 = 5000 · 2000 / 4 = 2500 N·m. Section modulus W = I / (H/2) = 54,220 mm³, so σ = M / W = 2,500,000 / 54,220 = 46.1 MPa.

Example 2: aluminium section 120 × 60 × 4, distributed load and self weight

Input: aluminium (E = 70,000 N/mm², ρ = 2700 kg/m³), L = 3000 mm, distributed load q = 500 N/m, self weight on, loaded on the narrow side.

A = 2·4·(120 + 60 − 2·4) − (4 − π)(8² − 4²) = 1334.8 mm², I = 2,407,000 mm⁴ (table: 241 cm⁴), W = 40,120 mm³.

Self weight qsw = A·ρ·g = 1334.8·10⁻⁶ · 2700 · 9.81 = 35.4 N/m. Total q = 535.4 N/m = 0.5354 N/mm.

f = 5·q·L⁴ / (384·E·I) = 5 · 0.5354 · 3000⁴ / (384 · 70,000 · 2,407,000) = 3.35 mm (L/895). M = q·L² / 8 = 602 N·m, σ = 15.0 MPa.