Design Calculations · Retaining ring

Retaining Ring Groove Calculator

Enter a shaft or bore diameter → get the DIN 471 / 472 groove and load capacity

DIN 471 sizes 3–300 mm. The groove is cut into the shaft.
Decimal comma or point both work. Only standard sizes have a DIN groove.
Compared with the load capacity of the groove (FN) and the ring (FR).
Empty = 200 MPa (basis of the DIN table). FN scales with ReL / 200.
Empty = sharp-edged abutment (FR). With a chamfer: F′Rg = FRg · g / g′.
Enter a diameter to see the groove
—

Groove dimensions

Enter a diameter: the groove dimensions appear here.
Print and CSV are free.
Details: all dimensions, ring, load capacity and sources

Design aid only. Check the dimensions against the current standard and the ring supplier’s data before production. Heavy type (DIN 471/472 Table 2) is not covered.