Design Calculations · Bolt torque

Bolt torque calculator: tightening torque and preload

Thread friction and head friction kept separate, following VDI 2230 and ISO 16047.

Calculator

Bolt with nut through two platesSide view: bolt head with bearing face (µK, Dkm), shank with thread (d, P, µG), clamp length lk between head and nut, preload FM and tightening torque MA on the head. nut µK · bearing face Dkm thread d, P P µG clamp length lk FM MA ν · Property class
Tap or hover a field: the matching dimension lights up in the drawing.

Pick thread size and property class, enter the friction and give the preload or the tightening torque you want. The calculator returns the other one.

M3–M36, coarse thread (pitch after ×). Fine thread follows later.

8.8, 10.9 or 12.9. Stainless steel follows later.

Free entry 0.04–0.30. Default 0.12.

Quick pick µG

Free entry 0.04–0.30. Default equal to µG, adjustable separately.

Quick pick µK
Head type
What do you enter?

Greater than 0.

Range 0.50–1.00. Default 0.90.

Range 1.1–4.0. Default 1.6 (calibrated torque wrench).

Default for this size and head type. Change it for a washer or flange head.

Override this for a washer or flange head.

Result

Tightening torque MA

— N·m

Set your torque wrench to this value.

Preload FM

— kN

Clamp force in the bolt after tightening.

Torque factor K

—

Simplified factor in T = K·F·d, useful for comparing with supplier charts.

Minimum preload FM,min

— kN

The lowest preload this tightening method reliably gives; the scatter is set by αA.

The 75 % of proof load rule of thumb covers tension only. This calculation lets the bolt reach 90 % of its yield strength during tightening, and that includes the torsion from thread friction.

Calculated at —.

Always check the tightening torque against your supplier’s data.

Basis: our own calculation following the principles of VDI 2230 Part 1 and ISO 16047. Thread dimensions ISO 261/724, yield strength ISO 898-1, head dimensions ISO 4017:2014 (dw_min) and ISO 4762, clearance hole ISO 273 medium.